New delivery schedule:
Deliveries are now being made on
Mondays & Wednesdays
ionSign Neutron 4-3G Pulse to GPRS Converters
Neutron4-3G is an independent AMR unit for pulsed consumption meters. It’s amazingly easy to install and use.
Neutron4-3G reads up to 4 meters hourly, half-hourly or quarterly, and delivers data to the server in the mobile data network. With surface mounting, it’s easy to place virtually anywhere, especially nice for gas and water meters. Meter supporting, the data is accurate for invoicing.
ionSign provides a cloud service for reporting and device management. However, Neutron4-3G can also directly transmit to any EMS, BMS, etc. Bespoke integrations are easy to design.
|– Optional cloud service for reporting||– Available with enclosure for higher IP class|
|– Electricity measurement||– Water measurement|
|– Energy measurement||– Gas measurement|
|Optional hardware set-ups|
|– Basic mode: 4 SO pulse inputs||– Repeater mode:2 pulse inputs and 2 pulse outputs|
|– T mode: 2 temperature inputs, 2 pulse inputs|
|Mobile user interface|
|– Easy to control with SMS messages||– Easy to install and setup, configure with a single SMS|
|– Standard HTTP protocol allows easy server interface and application development|
|– Integrated 3G GSM Module||– Operating voltage 11…13VDC|
|– 4 standard SO pulse inputs for open collector and relay outputs of measuring devices||– Current consumption 100mA (peak 200 mA)|
|– Hourly, half-hourly or quarterly data||– Operating temperature -25°c… 50°c|
|– Local buffer for transfer network failures (38 months for 60min data, halved for shorter)||– Operating humidity 5%…95% non-condensing|
|– SMA connector for external antenna||– Flanged ABS plastic enclosure|
|– Plug-in power supply and antenna included||– (WxHxD 125 x 51 x 25mm) | IP20|