Location

MWA Technology
MWA Technology Limited, Offices & Workshop,
2 Wharton Street Ind. Est., Birmingham, West Midlands, B7 5TR

+44 (0) 121 327 7771

X

Thermostats

Control system thermostats

Mechanical frost protection thermostat FT

RC-FT60
Mechanical frost protection thermostat FT available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery on Wednesday!

Regin

Mechanical frost protection thermostat FT

RC-FT60
Enquire

FT is a series of high quality electro-mechanical frost protection thermostats for use in cooling, heating and ventilation systems.

The FT electro-mechanical thermostats are constructed around a gas-filled capillary tube and sensor housing that transfers the changes in temperature to a change-over relay. The relay is capable of breaking up to 15 A at 230 V AC.  The FT series consists of frost protection thermostat for protecting air heaters in ventilation and climate control systems and heat exchangers in cooling systems. They can also be used to control electrical heating systems and for switching acoustic or optical alarm signals.  A DR-05 set of mounting brackets is included upon
delivery.

  • Gas-filled copper sensor element with a 1.8m, 3m or 6m long capillary tube
  • Dust-tight micro switch with switching contacts (heating/cooling)
  • Easy installation and wiring
  • Manual or automatic reset
  • Protection class IP65
MWA Code Storage Temp. Amb. Temp. Max Accuracy Class
RC-FT60 -30…+60°C 55°C ± 1K IP65

 

Top

Make an Enquiry

Please leave this field empty.

Mechanical immersion thermostat

RC-MTIB
Mechanical immersion thermostat available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery on Wednesday!

Regin

Mechanical immersion thermostat

RC-MTIB
Enquire

MTIB is a series of high quality electro-mechanical thermostats for use in cooling, heating and ventilation systems.

The MTIB electro-mechanical thermostats are constructed around a fluid-filled capillary tube and sensor housing that transfers the changes in temperature to a change-over relay.  The relay is capable of breaking up to 15 A at 230 V AC.  MTIB is intended for use in temperature control in pipes using water for heating or cooling, as well as in air conditioning systems, boilers and heaters.

  • Wide setpoint range
  • Fixed hysteresis
  • Breaking capacity 15 A at 230 V AC
  • Protection class IP65
MWA Code Temp. Range Amb. Temp. Class Capacity Amb. Temp.
RC-MTIB +20…+90 °C 10…90 % RH IP65 15 (8) A, 24…250 V AC -35…+65°C

 

Top

Make an Enquiry

Please leave this field empty.

Mechanical wall thermostat MTIR

RC-MTIR
Mechanical wall thermostat MTIR available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery on Wednesday!

Regin

Mechanical wall thermostat MTIR

RC-MTIR
Enquire

MTIR is a series of high quality electro-mechanical thermostats for use in cooling, heating and ventilation systems.

The MTIR electro-mechanical thermostats are constructed around a fluid-filled capillary tube and sensor housing that transfers the changes in temperature to a change-over relay.  In thermostats constructed for wall mounting, the capillary tube is wound and mounted on top of the housing. The relay is capable of breaking up to 15 A at 230 V AC.

  • Wide setpoint range
  • Adjustable or fixed hysteresis
  • Breaking capacity 15 A at 230 V AC
  • Protection class IP65
MWA Code Amb. Hum. Class Capacity Amb. Temp.
RC-MTIR 10…90 % RH IP65 15 (8) A, 24…250 V AC -35…+65°C

 

Top

Make an Enquiry

Please leave this field empty.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close