Location

MWA Technology
MWA Technology Limited, Offices & Workshop,
2 Wharton Street Ind. Est., Birmingham, West Midlands, B7 5TR

+44 (0) 121 327 7771

X
Turbine Gas Meters from MWA Technology

Turbine Gas Meters

A turbine gas meter is perfect for Secondary metering industrial applications where gas flow continuity is crucial.Using gas velocity for measuring the volume of gas within the meter, these inferential style meters measure the flow rates within the meter parameters.

Our range of turbine meters from Aichi ,Common, Itron are all, space saving, inline meters with a variety of options are available, including MID approved for Primary and Billing .Other options include MID volume converters, Biogas options with pulse, Mbus, Wireless Mbus and 4-20 Ma outputs to suit your application.

Aichi TBX low pressure drop digital turbine gas meters

TBX30 - TBX150
Aichi TBX low pressure drop digital turbine gas meters available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

The TBZ and TBX Series of turbine meters were developed to measure the gas consumption of small boilers, industrial furnaces, other individual pieces of equipment. The TBZ and TBX Series are precise and inexpensive — they are compact, light, and stylish too. They can handle a wide range of pressures and flows. Two built-in pulse oscillators allow remote meter-reading — or the configuration of an advanced energy management system.

  • Inline meter takes up less space
  • Self-supporting in pipework
  • 50mm meter same output as 3inch diaphragm meter
  • Maximum operating pressure 1.0 bar
MWA Code Description Fitting Min
m³/hr
Max
m³/hr
TBX30L-0.75 Low pressure drop turbine meter ¾” Screwed 4 30
TBX30L-1.0 Low pressure drop turbine meter 1” Screwed 4 30
TBX30L-1.25 Low pressure drop turbine meter 1¼” Screwed 4 30
TBX30L-1.5 Low pressure drop turbine meter 1½” Screwed 4 30
TBX100L-2.0 Low pressure drop turbine meter 2” Screwed 10 100
TBX150F Low pressure drop turbine meter 2” /50mm Flanged PN16 7 150
TBX PLUG TBX plug with 2 metre lead – 4 Pin Plug
Top

Aichi TBZ low pressure drop digital turbine gas meters

TBZ60 - TBZ300
Aichi TBZ low pressure drop digital turbine gas meters available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

Aichi Tokei

Aichi TBZ low pressure drop digital turbine gas meters

TBZ60 - TBZ300
Request a Quote  

The TBZ Series even offers a temperature/pressure compensation capability — gas flow is converted to standard conditions for display.

The TBZ and TBX Series of gas meters were jointly developed by Tokyo Gas and Aichi Tokei Denki, leaders in energy management.

  • Inline meter takes up less space
  • Self-supporting in pipework
  • 50mm meter same output as 3inch diaphragm meter
  • Maximum operating pressure 9.0 bar
MWA Code Description Fitting Min
m³/hr
Max
m³/hr
TBZ60 Turbine Meter Turbine Meter 1½” Flanged PN16 3 60
TBZ150 Low pressure drop turbine meter 2” Flanged PN16 7.5 150
TBZ300 Low pressure drop turbine meter 3” Flanged PN16 15 300
TBZ150KIT Kit PN6 50mm flanges, gaskets, BZP M16 bolts and nuts
TBZ300KIT PN6 80mm Flanges, Gaskets & BZP M16 Bolts & Nuts
TBZPULSE TBZ300 plug with 2 metre lead – 3 Pin Plug
Top

Common CGT-02 MID Turbine gas meters

CGT50 - CGT300
Common CGT-02 MID Turbine gas meters available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

Common

Common CGT-02 MID Turbine gas meters

CGT50 - CGT300
Request a Quote  
  • Fitted with low frequency pulse output as standard
  • Flanged PN16 connection
  • Cast Iron or Carbon Steel, suitable for natural gas and LPG -20 to 60C
  • Inline turbine gas meters with flanged PN16 connections, PN25, PN40, ANSI 150, 300.600.
  • For horizontal or vertical pipelines with 2 x DN straight lengths
  • Rangeability 1:20, Meters read in cubic metres, index can be head rotated through 360 deg
MWA Code Size Max Pressure Min
m³/hr
Max
m³/hr
CGT50G40 2″ 16 bar 6 65
CGT50G65 2″ 16 bar 10 100
CGT80G100 3″ 16 bar 8 160
CGT80G160 3″ 16 bar 13 250
CGT80G250 3″ 16 bar 20 400
CGT100G160 4″ 16 bar 13 250
CGT100G250 4″ 16 bar 20 400
CGT100G400 4″ 16 bar 32 650
CGT100G250 4″ 16 bar 20 400
CGT100G400 4″ 16 bar 32 650
CGT150G400 6″ 16 bar 32 650
CGT150G650 6″ 16 bar 50 1000
CGT150G1000 6″ 16 bar 80 1600
CGT200G650 8″ 16 bar 50 1000
CGT200G1000 8″ 16 bar 80 1600
CGT200G1600 8″ 16 bar 130 2500
CGT250G1000 10″ 16 bar 80 1600
CGT250G1600 10″ 16 bar 130 2500
CGT250G2500 10″ 16 bar 200 4000
CGT300G1600 12″ 16 bar 130 2500
CGT300G2500 12″ 16 bar 200 4000
CGT300G4000 12″ 16 bar 320 6500

 

CGT calibration certificates
CGT Encoder 4 -20 Ma or Mbus output
CGT 6 pin pulse plug and 2 metre lead
CGT high frequency pulse outut -external
CGT high frequency pulse outut -internal
CGT Remote 6 digit single LCD display installed in IP65 ABS enclosure -resettable
CGT Remote 2 X 6 digit twin LCD display installed in IP65 ABS enclosure -resettable
CGT Remote 3 x 6 digit single LCD display installed in IP67 enclosure
CGT Remote 6 digit single LCD display Programmable installed in IP67 enclosure
CGT Dresser Chatterbox – e.Model 103 Opto -isolation unit,battery operated ,4 outputs, Atex IS
CGT Relay Padplus pulse to Mbus converter
CGT CMK-03 pressure and temperature volume corrector
Top

Common CPT-01 Quantometers – flange fitting

CPT50 - CPT200
Common CPT-01 Quantometers – flange fitting available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

Common

Common CPT-01 Quantometers – flange fitting

CPT50 - CPT200
Request a Quote  

CPT Quantometers have been designed in order to provide our customers with reliable and inexpensive measuring instruments for secondary flows.

  • Inline turbine gas meters with wafer connections to suit PN16 flanges
  • Fitted with low frequency pulse output as standard – multiple LF & HF options available
  • Aluminium body, suitable for natural gas and LPG, -20°C to +60°C
  • Biogas option available, filter recommended for this media.
  • For horizontal or vertical pipelines with 5 x DN straight lengths of pipe up stream
  • Nominal rangeability 1:20, meters read in cubic metres, index can be head rotated through 350°
MWA Code Size Connections Pulse Values Max pressure Min
m³/hr
Max
m³/hr
Weight
CPT50G40* 50mm wafer for PN16 Pulse output, 1 pulse = 0.1 m³/hr 16 bar 6 65 3.6kg
CPT50G65* 50mm wafer for PN16 Pulse output, 1 pulse = 0.1 m³/hr 16 bar 10 100 3.6kg
CPT65G65* 65mm wafer for PN16 Pulse output, 1 pulse = 0.1 m³/hr 16 bar 8 100 5.3kg
CPT65G100 65mm wafer for PN16 Pulse output, 1 pulse = 1 m³/hr 16 bar 8 160 5.3kg
CPT80G100 80mm wafer for PN16 Pulse output, 1 pulse = 1 m³/hr 16 bar 8 160 5.3kg
CPT80G160 80mm wafer for PN16 Pulse output, 1 pulse = 1 m³/hr 16 bar 13 250 5.3kg
CPT80G250 80mm wafer for PN16 Pulse output, 1 pulse = 1 m³/hr 16 bar 20 400 5.3kg
CPT100G160 100mm wafer for PN16 Pulse output, 1 pulse = 1 m³/hr 16 bar 13 250 7.4kg
CPT100G250 100mm wafer for PN16 Pulse output, 1 pulse = 1 m³/hr 16 bar 20 400 7.4kg
CPT100G400 100mm wafer for PN16 Pulse output, 1 pulse = 1 m³/hr 16 bar 32 650 7.4kg
CPT150G400 150mm wafer for PN16 Pulse output, 1 pulse = 1 m³/hr 16 bar 32 650 11.6kg
CPT150G650 150mm wafer for PN16 Pulse output, 1 pulse = 1 m³/hr 16 bar 50 1000 11.6kg
CPT150G1000 150mm wafer for PN16 Pulse output, 1 pulse = 10 m³/hr 16 bar 80 1600 11.6kg
CPT200G650 200mm wafer for PN16 Pulse output, 1 pulse = 1 m³/hr 16 bar 50 1000 51kg
CPT200G1000 200mm wafer for PN16 Pulse output, 1 pulse = 10 m³/hr 16 bar 80 1600 51kg
CPT200G1600 200mm wafer for PN16 Pulse output, 1 pulse = 10 m³/hr 16 bar 80 2500 51kg

* Rangeability 1:10

Options

CPT calibration certificates
CPT Encoder 4-20 Ma or Mbus output
CPT 6-pin pulse plug and 2 metre lead
CPT high-frequency pulse output – external
CPT high-frequency pulse output – internal
CPT Remote 6-digit single LCD display Programmable installed in IP67 enclosure
CPT Chatterbox – e.Model unit, battery operated, 4 outputs, Atex IS.
Top

Common CPT-01 Quantometers – screwed fitting

CPT25 - CPT50
Common CPT-01 Quantometers – screwed fitting available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

Common

Common CPT-01 Quantometers – screwed fitting

CPT25 - CPT50
Request a Quote  

CPT Quantometers have been designed in order to provide our customers with reliable and inexpensive measuring instruments for secondary flows.

  • pressure resistant meter body
  • inlet flow conditioner
  • measuring cartridge and index head
  • magnetic coupling as the transferring elementbetween measuring
  • range extended to include 1 inch,1.¼ inch, 1.½ inch, 2 inch screwed options
  • meter for Biogas available ,filter recommended for this media.
  • Atex approved index head
  • meter tested to 2004/22/EC MID, Annex-MI-002 Class;1.5
MWA Code Size Connection QMin
m³/hr
QMax
m³/hr
CPT25SG16 25mm Screwed 2.5 25
CPT25SG25 25mm Screwed 4 40
CPT32SG25 32mm Screwed 4 40
CPT40SG40 40mm Screwed 6 65
CPT40SG65 40mm Screwed 10 100
CPT50SG40 50mm Screwed 6 65
CPT50SG65 50mm Screwed 10 100

Recommended accessories

MWA Code Description
CPTPLUG CPT Plug and pulse lead (2 meters)
FM25 25mm inline filer (50 micron)
FM32 32mm inline filer (50 micron)
FM40 40mm inline filer (50 micron)
FM50 50mm inline filer (50 micron)
Top

Dresser Actaris Fluxi 2000/TZ MID Turbine Gas Meters

TZ
Dresser Actaris Fluxi 2000/TZ MID Turbine Gas Meters available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

Dresser Actaris

Dresser Actaris Fluxi 2000/TZ MID Turbine Gas Meters

TZ
Request a Quote  

Dresser Actaris Flanged Turbine Gas Meter for Primary and Secondary Metering. Traceability to PTB standards.

Applications

Dresser Actaris Fluxi 2000/TZ meters are designed to measure natural gas, and various filtered, and non-corrosive gases. They are used to measure medium to high gas flow, at low, medium or high pressure. The Fluxi 2000/TZ meters have been optimised for use in all applications related to the transportation and distribution of gas. Fluxi 2000/TZ meters are approved for fiscal use.

Basic Features

  • PTB approved with only 2 DN inlet straight pipe, 0 (zero) DN outlet pipe even with severe perturbations
  • MID approved
  • Go beyond compliance with all current European and International Standards
  • Reduced pressure loss for low pressure network
  • Excellent high-pressure behaviour
  • IP 67 protection of the totaliser
  • Equipped as standard with the cyble target for ;
  • Cyble pulse unit,Cyble Atex pulse unit,Cyble Mbus unit
  • Various options available: integrated thermowells, oil pump, pulse transmitters, etc.
Technical Specifications
Metrological Approvals Compliant with the Measuring Instrument Directive 2004/22/EC | Approval number: DE-10-MI002-PTB001
Intrinsic Safety Approval Compliant with the Directive 94/9/EC | Approval Number: LCIE 06 ATEX 6031 X
Flow Rate From 5 m³/h to 10000 m³/h, G65 to G6500
Nominal Diameters From DN50 to DN400 mm (2″ to 16″)
Maximum Working Pressure Up to 100 bar depending on the body material and flanging
Mounting The Fluxi 2000/TZ meters can be installed either horizontally or vertically, for the DN50 to DN300, and horizontally for the DN400
Body Materials Ductile iron, cast steel or welded steel. Compliant with the Pressure Equipment Directive 97/23/EC
Temperature Range ATEX/PED: -30°C to +60°C MID: -25°C to +55°C Storage temperature: -40°C to +70°C
MWA Code Description Body Length
TZDN50G65 Dresser Actaris. DN50 Flanged Turbine Gas Meter Qmin 5 m³/h Qmax 100 m³/h PN16 150mm
TZDN80G100 Dresser Actaris. DN80 Flanged Turbine Gas Meter Qmin 8 m³/h Qmax 160 m³/h PN16 240mm
TZDN80G160  Dresser Actaris. DN80 Flanged Turbine Gas Meter Qmin 13 m³/h Qmax 250 m³/h PN16 240mm
TZDN80G250  Dresser Actaris. DN80 Flanged Turbine Gas Meter Qmin 20 m³/h Qmax 400 m³/h PN16 240mm
TZDN100G160  Dresser Actaris. DN100 Flanged Turbine Gas Meter Qmin 13 m³/h Qmax 250 m³/h PN16 300mm
TZDN100G250  Dresser Actaris. DN100 Flanged Turbine Gas Meter Qmin 20 m³/h Qmax 400 m³/h PN16 300mm
TZDN100G400  Dresser Actaris. DN100 Flanged Turbine Gas Meter Qmin 32 m³/h Qmax 650 m³/h PN16 300mm
TZDN150G400  Dresser Actaris. DN150 Flanged Turbine Gas Meter Qmin 32 m³/h Qmax 650 m³/h PN16 450mm
TZDN150G650  Dresser Actaris. DN150 Flanged Turbine Gas Meter Qmin 50 m³/h Qmax 1000 m³/h PN16 450mm
TZDN150G1000  Dresser Actaris. DN150 Flanged Turbine Gas Meter Qmin 50 m³/h Qmax 1000 m³/h PN16 450mm
TZDN200G650  Dresser Actaris. DN200 Flanged Turbine Gas Meter Qmin 50 m³/h Qmax 1000 m³/h PN16 600mm
TZDN200G1000  Dresser Actaris. DN200 Flanged Turbine Gas Meter Qmin 80 m³/h Qmax 1600 m³/h PN16 600mm
TZDN200G1600  Dresser Actaris. DN200 Flanged Turbine Gas Meter Qmin 130 m³/h Qmax 2500 m³/h PN16 600mm
TZDN250G1000  Dresser Actaris. DN250 Flanged Turbine Gas Meter Qmin 80 m³/h Qmax 1600 m³/h PN16 750mm
TZDN250G1600  Dresser Actaris. DN250 Flanged Turbine Gas Meter Qmin 130 m³/h Qmax 2500 m³/h PN16 750mm
TZDN250G2500  Dresser Actaris. DN250 Flanged Turbine Gas Meter Qmin 200 m³/h Qmax 4000 m³/h PN16 750mm
TZDN300G1600  Dresser Actaris. DN300 Flanged Turbine Gas Meter Qmin 130 m³/h Qmax 2500 m³/h PN16 900mm
TZDN300G2500  Dresser Actaris. DN300 Flanged Turbine Gas Meter Qmin 200 m³/h Qmax 4000 m³/h PN16 900mm
TZDN300G4000  Dresser Actaris. DN300 Flanged Turbine Gas Meter Qmin 320 m³/h Qmax 6500 m³/h PN16 900mm
TZDN400G2500  Dresser Actaris. DN400 Flanged Turbine Gas Meter Qmin 200 m³/h Qmax 4000 m³/h PN16 1200mm
TZDN400G4000  Dresser Actaris. DN400 Flanged Turbine Gas Meter Qmin 320 m³/h Qmax 6500 m³/h PN16 1200mm
TZDN400G6500  Dresser Actaris. DN400 Flanged Turbine Gas Meter Qmin 500 m³/h Qmax 10000 m³/h PN16 1200mm
TZDN500G4000  Dresser Actaris. DN500 Flanged Turbine Gas Meter Qmin 320 m³/h Qmax 6500 m³/h PN16 1500mm
TZDN500G6500  Dresser Actaris. DN500 Flanged Turbine Gas Meter Qmin 500 m³/h Qmax 10000 m³/h PN16 1500mm
Top

Dresser Actaris MZ Quantometers

MZ50 - MZ200
Dresser Actaris MZ Quantometers available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

Dresser Actaris

Dresser Actaris MZ Quantometers

MZ50 - MZ200
Request a Quote   Watch Our Product Video

Dresser Actaris turbine gas MZ meters are suitable for both natural gas and other filtered and non-corrosive gases. They are used to measure low to medium and high flow, at low or medium, or high pressure. Various additional fitting options are available including an oil pump and a PTFE coating version, making them also suitable for heavy duty measurement.

Biogas versions available, filter recommended for this media..

  • Turbine sizes: 50mm to 200mm
  • Flow rate: from 6m³/h to 2500m³/h
  • Dn 250 to 400mm options
  • Wafer type 50mm to 80mm, 100mm above PN16 gas
  • Flanging options: ISO PN10 to ISO PN110, ANSI 150 to ANSI 600
  • Cyble pulse unit, Cyble Atex pulse unit, Cyble Mbus unit
MWA Code Size Output Min
m³/hr
Max
m³/hr
MZ50G65 50mm Pulse 6 100
MZ80G160 80mm Pulse 16 250
MZ80G250 80mm Pulse 25 400
MZ100G250 100mm Pulse 25 400
MZ100G400 100mm Pulse 40 650
MZ150G650 150mm Pulse 65 1000
MZ150G1000 150mm Pulse 100 1600
MZ200G1000 200mm Pulse 100 1600
MZ200G1600 200mm Pulse 160 2500
Top

Honeywell Elster QA Quantometers

QA10 - QA650
Honeywell Elster QA Quantometers available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

Elster Honeywell

Honeywell Elster QA Quantometers

QA10 - QA650
Request a Quote  

Honeywell Elster Quantometers are highly reliable gas meters which meet the highest standards. By using the quantometers in production and heating processes, it is possible to control flow of gas precisely and therefore optimise the use of energy. They work on the principle of the rotating turbine wheel. The rotation of the turbine wheel is proportional to the volume of the flowing gas.

Features & Benefits

  • DVGW – approved.
  • Compact in size.
  • High reliability & standards.
  • Optional pulse output facility.
  • Suitable for various gases.

Technical Data

  • Rangeability: up to 1:20
  • Flow ranges: 1.6 -1,600 m³/h (56 – 56,000 ft³/h)
  • Diameters: DN 25 – 150
  • Pressure rates: PN 4, PN 16, ANSI 150
  • Gas temperature QA: -10°C to +60°C (14° to 140°F)
  • Ambient temperature QA: -20°C to +70°C (-4° to 158°F)
  • Ambient- / gas temperature QAe: 0°C to +50°C (32° to 122°F)

 

MWA Code Size Min
m³/hr
Max
m³/hr
QA10 DN25 25mm 1.6 16
QA16 DN25 25mm 2 25
QA25 DN25 25mm 2.5 40
QA40 DN25 25mm 3.3 65
QA40 DN40 40mm 5 65
QA65 DN 50 50mm 6 100
QA100 DN 80 80mm 10 160
QA160 DN 80 80mm 13 250
QA250 DN 100 100mm 20 400
QA400 DN 100 100mm 32 650
QA650 DN 150 150mm 50 1000
Top

Honeywell Elster TRZ2 Turbine Gas Meters

TRZ2
Honeywell Elster TRZ2 Turbine Gas Meters available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

Elster Honeywell

Honeywell Elster TRZ2 Turbine Gas Meters

TRZ2
Request a Quote  

Honeywell Elster – Instromet TRZ2 turbine gas meters are robust meters for use in stationary conditions. Over years they have proved themselves to be highly accurate and reliable devices for measuring the flow of gaseous substances. With the patented Honeywell Elster – Intromet measuring cartridge it is possible to save service time by replacement of the cartridge on site.

The measuring cartridge is supported with O-rings, is free of tension and is, therefore, not affected by any influences stemming from the housing or the ambient conditions such as temperature fluctuations.

Key Features

  • Turbine gas meters with measuring cartridge
  • Aluminium flow straightener DN80 – 150
  • Meter Types: G 65 – 1000
  • Flow Range: 5 – 1600m3/h
  • Diameters: DN50* – 150 (2″ – 6″)
  • Pressure rates: PN10 – 100, ANSI 150 – 600
  • Temperature Range: MID -25°C to +55°C, PED -25°C to +55°C (steel), ATEX -20°C to +60°C
  • Manual oil pump (standard for PN25 – 100 and ANSI 300 – 600)
  • Compact installation, inlet pipe length L ≥ 2DN
  • Length 3DN
  • Thermowell built into meter housing (optional)
  • Inegrated HF-pulser (optional)
  • Absolute-ENCODER S1 (optional)
  • EC, MID as well as different national approvals
  • Media: Natural gas, petroleum gas, town gas, nitrogen, argon, further gases on request
MWA Code Description Body Length
TRZDN50G65 Honeywell Elster. DN50 Flanged Turbine Gas Meter Qmin 5 m³/h Qmax 100 m³/h PN16 150mm
TRZDN80G100 Honeywell Elster. DN80 Flanged Turbine Gas Meter Qmin 8 m³/h Qmax 160 m³/h PN16 240mm
TRZDN80G160 Honeywell Elster. DN80 Flanged Turbine Gas Meter Qmin 13 m³/h Qmax 250 m³/h PN16 240mm
TRZDN80G250 Honeywell Elster. DN80 Flanged Turbine Gas Meter Qmin 20 m³/h Qmax 400 m³/h PN16 240mm
TRZDN100G160 Honeywell Elster. DN100 Flanged Turbine Gas Meter Qmin 13 m³/h Qmax 250 m³/h PN16 300mm
TRZDN100G250 Honeywell Elster. DN100 Flanged Turbine Gas Meter Qmin 20 m³/h Qmax 400 m³/h PN16 300mm
TRZDN100G400 Honeywell Elster. DN100 Flanged Turbine Gas Meter Qmin 32 m³/h Qmax 650 m³/h PN16 300mm
TRZDN150G250 Honeywell Elster. DN150 Flanged Turbine Gas Meter Qmin 20 m³/h Qmax 400 m³/h PN16 450mm
TRZDN150G400 Honeywell Elster. DN150 Flanged Turbine Gas Meter Qmin 32 m³/h Qmax 650 m³/h PN16 450mm
TRZDN150G650 Honeywell Elster. DN150 Flanged Turbine Gas Meter Qmin 50 m³/h Qmax 1000 m³/h PN16 450mm
TRZDN150G1000 Honeywell Elster. DN150 Flanged Turbine Gas Meter Qmin 80 m³/h Qmax 1600 m³/h PN16 450mm
Top

Nixon NTG Digital Turbine Air and Gas Meter

NTG3 - NTG150
Nixon NTG Digital Turbine Air and Gas Meter available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

Nixon

Nixon NTG Digital Turbine Air and Gas Meter

NTG3 - NTG150
Request a Quote  

The Nixon range of turbine flow meters offers high accuracy and high reliability. Available in a wide variety of body sizes and styles, all NTG flow meters possess an electrical pulse output directly proportional to flow rate, based upon the operating principle described in this publication. Remote flow rate indication, alarms, totalising and batch control functions are available utilising our wide range of secondary electronic instruments.

Standard end connections are screwed BSP parallel thread with included 30 degree internal cones to BS5200, but Ermeto threads are also available. Flanged meters are normally to ANSI 150 or BS4504 (DIN) standards, but older type flanges to BS10 tables D-H may also be fitted. A unique feature of the design is the use of helically milled rotors cut from solid in sizes up to 65mm.

Bearing bushes are of PTFE/Carbon HY49 or similar, or tungsten carbide depending upon the nature of the metered fluid. In all cases, the spindle is of tungsten carbide with Cobalt binder, and thrust balls of tungsten carbide. Stainless steel ball races are used in the smaller sizes. The electrical signal is a sinusoidal pulse of minimum height 50mV peak at lowest flow rate, rising to 800mV peak at max flow rate. For normal transmission distances pre-amplifiers are not essential since pulse shaping and conditioning are carried out in the appropriate electronic readout unit.

In cases where heavy electrical noise is present or where transmission distances are over 500 metres, pre-amplifiers of standard or intrinsically safe design are available as head mounted weatherproof units and loop powered.

NTG Industrial Flow Meters for Air and Gas

  • Temperature range -30°C to 150°C (400°C special design)
  • Horizontal or vertical mounting
  • Upto 500m transmission without pre-amplifiers
MWA Code Fitting Minlts/min Maxlts/min
NTG3 ⅜” Screwed 0.5 5
NTG5 ½” Screwed 1.2 10
NTG7 ½” Screwed 2 20
NTG11 ½” Screwed 5 50
NTG13 ¾” Screwed 8 80
NTG19 1” Screwed 15 150
NTG24 1” Screwed 25 250
NTG32 1¼” Screwed 45 450
NTG38 1½” Screwed 65 650
NTG48 2” Screwed 110 1100
NTG65 3” Screwed 200 2000
NTG80 3” Flanged 300 3000
NTG100 4” Flanged 500 5000
NT150 6” Flanged 1000 10000
Top

RMG TME 400 VC Digital Turbine meter with volume corrector

TME 400 VC
RMG TME 400 VC Digital Turbine meter with volume corrector available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

RMG turbine meter  TME 400  VC
The TME400 VC turbine meter is a flow meter suitable for gas measurement to comply with EN12261 ,EN 12405 and OIML.
Electronic totalizer which can display actual flow rate ,complete with pressure and temperature volume corrector.
Available with LF low frequency and HF high frequency output. Ex ib IIC T6 ,Zone 1, RS485 Modbus and 4-20 Ma
Battery operated 6 years or external power for Modbus
Meter head IP65 Atex II 2G Ex ia IIC T4 Gb
Temperature sensor fitted
MID Measuring range standard  1 . 20 up to 160 possible .
Flanged PN16 Standard ,Options up to PN40,ANSI300
Temperature  -25C to + 55C
Pressure connection standard for pressure transmitter 0.6 to 6.0 bara standard
Materials – body cast iron or cast steel, Delrin and Aluminium rotors
Accuracy MID
Size Max flow m3/h Min flow m3/h Pulse value m3/h
50mm 100 5 0.1
80mm 160,250,400 8, 12.5 , 20 1
100mm 250,400,650 12.5,20,32 1
150mm 650 ,1000,1600 32,50,80 1,1,10
200mm 1600 ,2500 80,125 10
250mm 1600 ,2500 , 4000, 80,125,200 10
300mm 4000 ,6500, 200,320 10
Top

RMG Turbine gas meter for Hydogen

RMG Turbine gas meter for Hydogen available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

RMG

RMG Turbine gas meter for Hydogen

Request a Quote  

The TRZ03 Turbine gas meter is suitable for natural gas and hydrogen.

Measurement in compliance with EN12261 and OIML

MID approval T10417

Low Frequency output in the meter head with High Frequency pulse output

Protection IP65

Standard Measuring range 1:20 ,Options up to 1:160

Pipe size 50 to 200mm PN16,PN40 option.ANSI 150,300,600 option

The pulse transmitters are intrinsically safe Ex ib IIC T6 suitable for Zone 1.

Pressure connection for PTZ volume corrector ERZ 2000

Accuracy +/- 1% Q min to 0.2 Q max,0.5% for 0.2 Q max to Q max

Top

RMG Turbine meter TRZ 03

TRZ 03
RMG Turbine meter TRZ 03 available at MWA Technology
Speedy delivery from MWA Technology!

Order in the next

for guaranteed delivery tomorrow!

RMG

RMG Turbine meter TRZ 03

TRZ 03
Request a Quote  

 

RMG turbine meter  TRZ03
The TRZ 03 turbine meter is a flow meter suitable for gas measurement to comply with EN12261 and OIML.
Available with LF low frequency and HF high frequency output Atex .Ex ib IIC T6 ,Zone 1
Meter head IP65
Thermowells inside meter – option
MID Measuring range standard  1 . 20 (up to 160 possible) .
Flanged PN16 Standard ,Options up to PN100,ANSI600
Temperature  -25C to + 55C
Pressure connection standard for pressure transmitter
Materials – body cast iron or cast steel, Delrin and Aluminium rotors
Accuracy MID
Size Max flow m3/h Min flow m3/h Pulse value m3/h
50mm 100 5 0.1
80mm 160,250,400 8, 12.5 , 20 1
100mm 250,400,650 12.5,20,32 1
150mm 650 ,1000,1600 32,50,80 1,1,10
200mm 1600 ,2500 80,125 10
250mm 1600 ,2500 , 4000, 80,125,200 10
300mm 4000 ,6500, 200,320 10
400mm 6500 , 10000 320,500 10
500mm 10000 , 16000 500,800 10 , 100
600mm 16000 , 25000, 800 ,1250 10 ,100
Top

Added to basket!

Submit Enquiry Now

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close