Fire Fighting

• 100mm (4”) dry rising main uses a 2- way inlet breeching in a vertical or horizontal position.
• 150mm (6”) dry rising main uses a 4-Way inlet breeching.
• Dry riser equipment complies with the requirements of BS 5041 Part 3.
• The Breechings are normally housed in dry riser inlet cabinets, normally recessed into the external wall of the building and the outlet valves are housed in dry riser outlet cabinets on every floor of the building.
• Dry riser landing valves are available with bsp or PN16 connections

An inlet breeching at ground level provides the connection to the water supply of the dry riser system. The dry riser system is normally dry and is charged by the fire brigade in an emergency. Breeching inlets to the dry riser have either 2 or 4 inlet connections complete with 2.5” male instantaneous inlets to BS336 fitted with non-return valves and with a 1″ drain valve.

• Recessed Vertical or Horizontal options
• Inlet and Outlet cabinets
• Cabinet & Door 16swg Zintec Steel – Stainless steel options
• Colour As Standard Red Ral 3002
• Architrave 30mm Wide All Round
• Glass 6mm Georgian Wired, PRV Lettering
• Lock Yale Slam Lock Keyed Alike
• Hinge Stainless Steel Piano Hinge
• Conforms To BS 5041 Part 5

Foam Inlet adaptor (Instantaneous)

• Inlet 21/2″ Inst. Male BS336 – Outlet 21/2 ” BSP Female.
• Inlet 21/2″ Inst. Male BS336 – Outlet 3 ” BSP Female.

Foam Inlet adaptor (Instantaneous)

• Inlet 21/2″ Inst. Male BS336
• Outlet flanged to your specifications.

Taper foam Inlet

• Inlet Taper Bore to accept Branchpipe – Outlet 21/2″ BSP Female
• Inlet Taper Bore to accept Branchpipe – Outlet 3″ BSP Female

Foam spreader

• Straight type Inlet 21/2″ BSP Female
• Straight type Inlet 3″ BSP Female

Foam spreader

• Elbow type Inlet 21/2″ BSP Female
• Elbow type Inlet 3″ BSP Female

• Cabinet & Door16swg Zintec Steel
• Colour As Standard Red Ral 3002
• Architrave 30mm Wide All Round
• Glass 6mm Georgian Wired, PRV Lettering
• Lock Yale Slam Lock Keyed Alike
• Hinge Stainless Steel Piano Hinge
• Conforms To BS 5041 Part 5

Single Foam Inlet Cabinet	Double Foam Inlet Cabinet	Triple Foam Inlet Cabinet

Options

Full cabinet manufactured from 16swg zintec steel polyester powder coated to your colour specifications. Available in full stainless steel all front faces satin polished finish.

The Dry Riser Inlet Cabinet and system is normally a dry unit that is charged by the fire brigade in the event of an emergency. An inlet breeching at ground level provides the connection to the water supply.

Breeching inlets have either 2 or 4 inlet connections complete with 2.5” male instantaneous inlets to BS336 fitted with non-return valves, 1” drain valve and caps and chains.

A 100mm (4”) rising main uses a 2-way inlet breeching in a vertical or horizontal position. A 150mm (6”) rising main uses a 4-Way inlet breeching. Inlet Breechings comply with the requirements of BS 5041 Part 3.

The Breechings are normally housed in inlet cabinets, normally recessed into the external wall of the building in a vertical or horizontal position, 4 -way breechings in a square inlet breeching cabinet, manufactured in accordance with BS 5041 Part 5.

Cabinets for foam inlets are available on request.

Recommended mounting 750mm from floor to valve centre.

16SWG Zintec Steel

Part Number:10905502 Dry Riser Inet Vertical
Material:16SWG Zintec Steel
Finish: RED RAL3002
Box Dimensions: 395(Wide) x 595(High) x 295(Deep) mm
Minimum Aperture: 395(Wide) x 595(High) X 295(Deep) mm

16SWG Stainless Steel

Part Number: 10905506 Dry Riser Inlet Vertical
Material:16SWG Stainless Steel
Finish: Satin Polished
Box Dimensions: 395(Wide) x 595(High) x 295(Deep) mm
Minimum Aperture: 395(Wide) x 595(High) X 295(Deep) mm

Landon Kingsway’s single-point foam inlet cabinet approved to BS 5306 Part 1.

Free fall fire valves comply to BS799 and are for use on gas or oil line installations. These valves are often referred to as either ‘dead weight valves’ or ‘drop arm valves’. The free fall fire valve can be used as an emergency shut off valve or oil dump line valve and can be used in a numerous amount of different configurations which can be operated by heat, electrically or manually.

Full BMS and fire alarm integration can be very easily achieved through various different types of switching methods depending on specification requirements. Valve kits are complete with the valve body, weight, arm, pulleys, fusible link and cable connectors.
Valve sizes available 1/2” to 3” bsp 15mm to 200mm flanged PN16

Release mechanisms and switches.

• Electro magnetic release mechanism 24vDC
• Electro magnetic release mechanism 110vAc
• Electro magnetic release mechanism 230vAc
• Electro magnetic release mechanism 24vDc with auxiliary switch
• Electro magnetic release mechanism 110vAc with auxiliary switch
• Electro magnetic release mechanism 230vAc with auxiliary switch
• Valve arm tilt switch 1ph and Valve arm tilt switch 3ph
• Free fall fire valve position indicator switch – mercury switch
• Manual quick release
• Electro thermal link
• Emergency panic button – twist to reset
• Emergency panic button – key to reset
• Electromek MkII – manual quick release mechanism
• Solenoid Quick Release MKII

The Landon Kingsway inlet breaching valves have a universal pattern to BS5041 Part 3, and come complete with non-return valve, rubber dust cap, 25mm drain valve, and cap/chain as standard.

Available in

• 2-off, 2 1/2 inch instantaneous male inlets and 4 inch BS Table D flanged outlet
• 2-off, 2 1/2 inch instantaneous male inlets and 4 inch BSP outlet
• 2-off, 2 1/2 inch instantaneous male inlets and 100mm PN16 flanged outlet
• 4-off, 2 1/2 inch instantaneous male inlets and 150mm PN16 flanged outlet