Location

MWA Technology
MWA Technology Limited, Offices & Workshop,
2 Wharton Street Ind. Est., Birmingham, West Midlands, B7 5TR

+44 (0) 121 327 7771

X
Gas Safety from MWA Technology

Gas Safety

Landon Kingsway GDP2 Gas Detection Panels

Landon Kingsway GDP2 Gas Detection Panels available at MWA Technology
Speedy delivery from MWA Technology!

New delivery schedule:

Deliveries are now being made on

Mondays & Wednesdays

Landon Kingsway

Landon Kingsway GDP2 Gas Detection Panels

Request a Quote  

GDP2 can be used as a single or two zone gas detection and shut off system. Used in a variety of applications including boiler-houses, plant rooms and factories.

The Merlin GDP2 can operate with up to two Merlin detectors to monitor a variety of gases, the more common being Natural gas (Methane), Carbon Monoxide and LPG.

Gas detectors are fixed remote from the GDP2 panel & should be wired back to the GDP2 panel with three core low voltage cable. Remote emergency shutoff buttons and thermal links can also be connected to the Merlin GDP2 panel.

The use of clearly marked PCB connections, low voltage wiring and push-fit wiring connections makes the GDP2 very simple to install.

Top

Landon Kingsway LKGSP4 Gas Safety Panel

Landon Kingsway LKGSP4 Gas Safety Panel available at MWA Technology
Speedy delivery from MWA Technology!

New delivery schedule:

Deliveries are now being made on

Mondays & Wednesdays

Landon Kingsway

Landon Kingsway LKGSP4 Gas Safety Panel

Request a Quote  

The LKGSP4 is capable of detecting the presence of targeted gases; Natural gas, Carbon Monoxide or Liquid Petroleum.

If the targeted gases are detected, a signal will be sent back to the panel, the panel then sends a signal to close the gas solenoid valve shutting off the gas supply.

The panel will then indicate which zone is in alarm. Once the problem has been rectified the reset button is pressed and the panel should indicate zone on. If there is still gas present in the area (zone) the panel will go into alarm once again.

The IP54 / Sensor 10 heads should be mounted either on a vertical wall or on the ceiling facing downwards, this is so dust does not settle on the sensor vent.

Electrical connection is made to terminals inside the sensor.

Technical Specifications

Supply Voltage 230V AC
Power 30VA + valve
Enclosure Off-White epoxy powder coated steel with locking door
Temperature Range: -10°C to +50°Valve Voltage
Output as supply voltage
Valve current output of 5A max

Weight 1 Kg (excluding main valve)
Timer Programmable 7 day
Valve EN161 Approved gas valve
Pressure Switch
Setting Range 2.5 to 50mbar (1 to 20” w.g.)
Mounting Thread G¼ female on base

Housing Material Diecast Aluminium with Polycarbonate cover
Electrical Contacts Screw terminals via PG11
Cable gland
Protection Rating IP54
Approvals To EU Gas Appliance Directive CE-0085 AO 0012

Top

Landon Kingsway Severlek Emergency Button

Landon Kingsway Severlek Emergency Button available at MWA Technology
Speedy delivery from MWA Technology!

New delivery schedule:

Deliveries are now being made on

Mondays & Wednesdays

Landon Kingsway

Landon Kingsway Severlek Emergency Button

Request a Quote  

The Landon Kingsway Severlek Emergency Button has a variety of uses where it is required to have a latching push button switch to sound an alarm or de-activate equipment. The switch has both a normally open and a normally closed contact pair which both change state on the switch being pressed. Enclosure Grey epoxy coated die-cast aluminium with red plastic button.

Dimensions: 89 x 71 x 95mm
Fixing centres: 74 x 57mm Ø8mm
Protection rating: IP65
Switch rating: 2KVA AC, 100W DC
Wire size: 2x 2.5mm²
Conduit Connection: PG16
Weight: 0.4kg

Available Models:
Manual Quick Release Mechanism
Electromek MK11 manual relese with 2X C/0 contacts
Sevelek Emergency Panic Button C/0 contacts
Kingsway Emergency Panic Button
Key Operated isolation Switch

Top

Landon Kingsway Stand Alone Gas Detector

Landon Kingsway Stand Alone Gas Detector available at MWA Technology
Speedy delivery from MWA Technology!

New delivery schedule:

Deliveries are now being made on

Mondays & Wednesdays

Landon Kingsway

Landon Kingsway Stand Alone Gas Detector

Request a Quote  

Landon Kingsway’s Stand Alone Gas Detectors are available as single or multi channel, both come with sensors.

Options

FLK11 Stand Alone Detector & Sensor EExd (Natural Gas) with pre-alarm 24v DC
(Other gases available on request)

FLK12 Stand Alone Detector & Sensor (CO) with pre-alarm 230v AC

Top

Added to basket!

Submit Enquiry Now

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close