Hot water meter range
Elster H4300 hot water meters used for monitoring.
B Meters hot water meters used for monitoring throughout Europe.
New B Meters GSD8 ½ inch and ¾ inline single jet meter MID Approval.
New B Meters GMDX ½ inch to 2 inline Multijet meter MID Approval.
New B Meters WDEK40 Woltmann meters MID approved.
-
B Meters GMDM-I multi jet hot water meters
-
B Meters GSD8 single jet hot water meters
-
B METERS MB MASTER
-
B METERS RFM-C3 Wireless MBus Concentrator
-
B METERS RFM-MB1 Wired MBus Module for water Meters
-
B Meters WDE-K50 Woltmann Hot water meter
-
Honeywell Elster H4300 Woltmann Hot water meters
-
Itron Aquadis volumetric hot water meter
B Meters GMDM-I multi jet hot water meters
New delivery schedule:
Deliveries are now being made on
Mondays & Wednesdays
- GMDM-I is a multi-jet dry dial magnetic transmission water meter with a 360 deg rotating lid.
- MID accuracy 2044/22/EC
- Hot water 90C and 16 Bar max
- Inductive pre equipped for installation of data communication modules ,Pulse , Mbus , Wireless Mbus
- Horizontal installation R100
| MWA Code | C/W PULSE UNIT IWM -PL3 | Connections | Min flow l/hr |
Q3 MAX M3/HR | LENGTH |
|---|---|---|---|---|---|
| GMDM-I AC 15 | 1 pulse = 10 litres | c/w ½” BSPT unions | 250 | 2.5 | 145 |
| GMDM-I AC 20 | 1 pulse = 10 litres | c/w ¾” BSPT unions | 40 | 4.0 | 190 |
| GMDM-I AC 25 | 1 pulse = 10 litres | c/w 1” BSPT unions | 63 | 6.3 | 260 |
| GMDM-I-AC 30 | 1 pulse = 10 litres | c/w 1¼” BSPT unions | 100 | 10.0 | 260 |
| GMDM-I AC 40 | 1 pulse = 10 litres | c/w 1½” BSPT unions | 160 | 16.0 | 300 |
| GMDM-I AC 50 | 1 pulse = 10 litres | c/w 2” BSPT unions | 260 | 25.0 | 300 |
IWM-PL3 Pulse unit
IWM- MB3 Mbus unit
IWM-TX3 wireless Mbus unit
B Meters GSD8 single jet hot water meters
New delivery schedule:
Deliveries are now being made on
Mondays & Wednesdays
- WRAS approved
- Single jet meters ,MID accuracy 2044/22/EC
- Hot water 90C and 16 Bar max
- Brass, inline meters, with and without pulse lead
- Horizontal (H) and Vertical (V) installation
- Mbus output option
| MWA Code | Type | Connections | Min flow l/hr |
Flow range | Q3 max m3/hr |
|---|---|---|---|---|---|
| GSD8/15 | Direct Read | c/w ½” BSPT unions | 25 | R100 -H | 2.5 |
| GSD8/20 | Direct Read | c/w ¾” BSPT unions | 40 | R100 -H | 4.0 |
| GSD8/15P | 1 pulse = 1 litre | c/w ½” BSPT unions | 25 | R100 -H | 2.5 |
| GSD8/20P | 1 pulse = 1 litre | c/w ¾” BSPT unions | 40 | R100 -H | 4.0 |
B METERS MB MASTER
New delivery schedule:
Deliveries are now being made on
Mondays & Wednesdays
MB MASTER concentrator allows communication with all data transmission modules that adopt the MBUS EN13757-3 standard.
It has been designed to manage networks consisting of M-Bus modules produced by B METERS water and heat meters. Available in 2 versions to support up to 60 or 250 network devices, it can handle up to 1200 m long network branches.
Equipped with an high contrast display it enables users to easily view present and historical consumption data up to 1 previous year (12 months values).
- Allows communication with all MBus equipment
- Suitable for GSD8 B METERS water meters
- Available in supporting network up to 60 and 250 MBus meters
- Cable length 1200m
- Supplied with software
| Specification | Value |
|---|---|
| Working temperature | – 12oC to 55oC |
| Power supply | 230V AC |
| Protection | IP54 |
| Protocol | MBus standard EN13757-2/3 |
| Network cable max length | up to 1200 metres |
| Data available | Actual consumption up to 12 month historical values |
B METERS RFM-C3 Wireless MBus Concentrator
New delivery schedule:
Deliveries are now being made on
Mondays & Wednesdays
The RFM-C3 is a gateway/data concentrator that collects data sent from Wireless M-Bus devices and transmits them via GPRS signal or via Ethernet / LAN / Wi-Fi network.
The consumption data and the information sent by the B METERS radio modules, measuring devices and the heat cost allocators, equipped with Wireless M-Bus interfaces, are collected by the RFM-C3 concentrator and sent via E-mail by using the GPRS network or, alternatively, an Internet connection via Ethernet / LAN / Wi-Fi network.The E-mail contains the file of the acquired telegrams in .txt format and it is forwarded up to a maximum of five recipients, with daily/weekly/monthly frequency.
The configuration of the device is performed by using a PC connected with a LAN cable (RJ-45 connector) on the Ethernet port of the RFM-C3 concentrator.
- GPRS gateway to collect data from modules RFM -TX1, RFM-TX2
- With integrated 868 mhZ Wireless module to collect readings abnd send data by GPRS
| Specification | Value |
|---|---|
| Radio interfaces | WMBUS EN13757-4@’868 MHz GSM/GPRS Quadband 890/900/1800/1900 MHz |
| Antennas | GSM and 868 MHz integrated |
| Coverage | 300 meters from meters |
| Power supply | Lithium battery 3.6 V |
| Battery life | 5 years, 2 readings a month |
| Configuration | User friendly configuration software |
| Configuration mode | Local USB, remote GPRS SMS |
| Temperature range | -20oC to 60oC |
| Protection | IP68 |
B METERS RFM-MB1 Wired MBus Module for water Meters
New delivery schedule:
Deliveries are now being made on
Mondays & Wednesdays
The RFM-MB1 is a wired M-BUS module suitable for the consumption data transmission and applicable to the single jet GSD8-RFM.
Easy to install and configure, in addition to the current consumption and up to 12 months of historical values, it can detect several fraud attempts against the meters, the prolonged functioning at the maximum flow rate (Q4) and a potential water loss downstream the meter.
| Specification | Value |
|---|---|
| Working temperature | – 10oC to 55oC |
| Power supply | Bus power supply + 3v lithium battery |
| Battery life | Without bus power 1 year |
| Protection | IP65 |
| Data transmission | Wired MBus EN 13757-2/3 |
| Coverage | Depending on MBus master |
| Measuring sensibility | 1 litre |
| Transmitted Data | Volume consumption, Alarms |
| Alarms | Discharged battery, module removal, magnetic fraud attempt, maximum flow rate overlapping, backward flow, leakage detection |
B Meters WDE-K50 Woltmann Hot water meter
New delivery schedule:
Deliveries are now being made on
Mondays & Wednesdays
Key Features:
- Horizontal Woltmann with removeable insert. Sealed counter mechanism with magnetic transmission.
- inductive pre -equipment for the installation of data communicating modules ,Pulse ,Mbus and Wireless Mbus.
- Wide measuring range
- Suitable for hot water 90C max
- CEN MID 2014/32/UE approved
- Direct reading on 6 numeric rolls ,360 deg rotating dry dial ,with lid
- MID R100 horizontal and vertical
| MWA CODE | TYPE C/W IWM-PL4 | CONNECTIONS | Q1 MIN FLOW M3/HR | Q3 ,MAX FLOW M3/HR | LENGTH MM |
|---|---|---|---|---|---|
| WDE-K50 AC 50 | 1 pulse = 100 litres | 50mm PN16 | 0.4 | 40 | 200 |
| WDE-K50 AC 65 | 1 pulse = 100 litres | 65mm PN16 | 0.63 | 63 | 200 |
| WDE-K50 AC 80 | 1 pulse = 100 litres | 80mm PN16 | 1 | 100 | 225 |
| WDE-K50-AC 100 | 1 pulse = 100 litres | 100mm PN16 | 1.6 | 160 | 250 |
| WDE-K50 AC 125 | 1 pulse = 100 litres | 125mm PN16 | 1.6 | 160 | 250 |
| WDE-K50 AC 150 | 1 pulse = 100 litres | 150mm PN16 | 2.5 | 250 | 300 |
| WDE-K50 AC 200 | 1 pulse = 100 litres | 200mm PN16 | 4 | 400 | 350 |
Honeywell Elster H4300 Woltmann Hot water meters
New delivery schedule:
Deliveries are now being made on
Mondays & Wednesdays
- Woltmann meters, iso 4060 Class A accuracy
- Hot water 130C and 16 Bar max
- Cast Iron epoxy coated, inline meters, pulse output as standard
- Horizontal and Vertical installation
| MWA Code | Type | Connections | Min flow m3/hr | Qnom m3/hr | Qmax m3/hr |
|---|---|---|---|---|---|
| H4300/50 | 1 pulse =100 litres | 2” flanged PN16 | 0.55 | 15 | 30 |
| H4300/65 | 1 pulse =100 litres | 2½” flanged PN16 | 0.55 | 25 | 60 |
| H4300/80 | 1 pulse =100 litres | 3” flanged PN16 | 2 | 40 | 90 |
| H4300/100 | 1 pulse =100 litres | 4” flanged PN16 | 2.4 | 60 | 200 |
| H4300/125 | 1 pulse =100 litres | 5” flanged PN16 | 3.5 | 100 | 200 |
| H4300/150 | 1 pulse =100 litres | 6” flanged PN16 | 4.54 | 150 | 300 |
| H4300/200 | 1 pulse =100 litres | 8” flanged PN16 | 8 | 250 | 500 |
Itron Aquadis volumetric hot water meter
New delivery schedule:
Deliveries are now being made on
Mondays & Wednesdays
Key Features
- Aquadis Hot Water Meter 90°C 16 bar MID 2004/22/ EN14154-2005 (Class R160)
- Rotary piston volumetric water meter
- Brass body – Horizontal & Vertical Installation. Accuracy +/- 2%
- Cyble communication modules
| MWA Code | Type Class C (MID R315) | Body Length |
|---|---|---|
| AQU15H | Itron. ½” BSP Volumetric Hot Water Meter Q3 = 2.5m³/h R=160 | 110mm |
| AQU20H | Itron. ¾” BSP Volumetric Hot Water Meter Q3 = 4m³/h R=160 | 190mm |
Options
Cyble pulse unit with 5 metre lead
Cyble Mbus unit with 5 metre lead
Cyble wireless Mbus unit