MWA Technology
MWA Technology Limited, Offices & Workshop,
2 Wharton Street Ind. Est., Birmingham, West Midlands, B7 5TR

+44 (0) 121 327 7771


NT Industrial Flow Meters

NT3 - NT150
NT Industrial Flow Meters available at MWA Technology
Speedy delivery from MWA Technology!

Order by

4:30pm on Monday

for guaranteed delivery on Tuesday!


NT Industrial Flow Meters

NT3 - NT150
Request a Quote  

Standard end connections are screwed BSP parallel thread with included 30 degree internal cones to BS5200, but Ermeto threads are also available. Flanged meters are normally to ANSI 150 or BS4504 (DIN) standards, but older type flanges to BS10 tables D-H may also be fitted. A unique feature of the design is the use of helically milled rotors cut from solid in sizes up to 65mm.

Bearing bushes are of PTFE/Carbon HY49 or similar, or tungsten carbide depending upon the nature of the metered fluid. In all cases, the spindle is of tungsten carbide with Cobalt binder, and thrust balls of tungsten carbide. Stainless steel ball races are used in the smaller sizes. The electrical signal is a sinusoidal pulse of minimum height 50mV peak at lowest flow rate, rising to 800mV peak at max flow rate. For normal transmission distances pre-amplifiers are not essential since pulse shaping and conditioning are carried out in the appropriate electronic readout unit.

In cases where heavy electrical noise is present or where transmission distances are over 500 metres, pre-amplifiers of standard or intrinsically safe design are available as head mounted weatherproof units and loop powered.

  • Temperature range -30°C to 150°C (400°C special design)
  • Horizontal or vertical mounting
  • Upto 500m transmission without pre-amplifiers
MWACode Description Fitting Minlts/min Maxlts/min
NT3 Nixon turbine flow meter 3/8” Screwed 0.5 5
NT5 Nixon turbine flow meter ½” Screwed 1.2 10
NT7 Nixon turbine flow meter ½” Screwed 2 20
NT11 Nixon turbine flow meter ½” Screwed 5 50
NT13 Nixon turbine flow meter ¾” Screwed 8 80
NT19 Nixon turbine flow meter 1” Screwed 15 150
NT24 Nixon turbine flow meter 1” Screwed 25 250
NT32 Nixon turbine flow meter 1¼” Screwed 45 450
NT38 Nixon turbine flow meter 1½” Screwed 65 650
NT48 Nixon turbine flow meter 2” Screwed 110 1100
NT65 Nixon turbine flow meter 3” Screwed 200 2000
NT80 Nixon turbine flow meter 3” Flanged 300 3000
NT100 Nixon turbine flow meter 4” Flanged 500 5000
NT150 Nixon turbine flow meter 6” Flanged 1000 10000

Make an Enquiry

    Added to basket!

    Submit Enquiry Now

    By continuing to use the site, you agree to the use of cookies. more information

    The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.